Can I Resurface Corian

Corian is a solid surface countertop material made by DuPont. It is an acrylic material that can be buffed or sanded to repair scratches and other damage. You can also resurface Corian by painting it.

  • First, clean the surface of the Corian with a mild soap and water solution
  • Next, sand the surface of the Corian with a medium-grit sandpaper to rough it up
  • Once the surface is roughed up, wipe it down with a damp cloth to remove any dust particles
  • Next, apply a thin layer of Corian resurfacing adhesive evenly across the surface
  • Finally, apply a thin layer of Corian resurfacing gelcoat over top of the adhesive and allow it to cure for 24 hours before using the countertop again
Can I Resurface Corian


How Much Does It Cost to Resurface Corian Countertops?

Resurfacing your Corian countertops can be a great way to give them a new look without having to replace them entirely. But how much does it cost to resurface Corian countertops? The cost of resurfacing Corian countertops will depend on a few factors, including the size of your countertops and the type of finish you want.

Generally speaking, you can expect to pay anywhere from $300 to $1,000 to have your Corian countertops resurfaced. If you’re looking for a more budget-friendly option, you can opt for painting your Corian countertops instead of resurfacing them. This will typically cost less than $100 and can give your counters a whole new look.

Can Corian Be Recolored?

Corian is a solid surface countertop material made by Dupont. It is non-porous, stain resistant, and easy to clean. Corian can be damaged by heat, however, so it is not recommended for use near cooktops or in other areas where high temperatures are common.

Because Corian is non-porous, it can be recolored using special Corian repair kits that are available from Dupont or from some hardware stores. The process of recoloring Corian is not difficult, but it does require some care and attention to detail to achieve the best results.

Can You Sand down Corian Countertops?

Yes, you can sand down Corian countertops. You will need to use a fine-grit sandpaper and go slowly to avoid damaging the countertop. Once you have sanded down the surface, you can then polish it to restore the shine.

Can a Corian Sink Be Refinished?

When it comes to Corian sinks, the good news is that they can be refinished if they become scratched or stained. The bad news is that this is not a do-it-yourself project; you’ll need to hire a professional to do the job. The first step in refinishing a Corian sink is to sand down the surface to remove any existing scratches or stains.

This can be done with either wet or dry sandpaper; however, using wet sandpaper will minimize the risk of damaging the sink. Once the surface is sanded smooth, it’s time to apply the new finish. There are two popular choices for finishing Corian sinks: epoxy and polyurethane.

Epoxy is more durable and resistant to scratches, but it can yellow over time; polyurethane has a more natural look but isn’t as tough against wear and tear. Whichever finish you choose, be sure to apply it evenly and allow it to cure completely before using the sink again.

Scratch Removal – Corian Solid Surface Countertop Scratch Removal Sanding

Can You Resurface Corian

Corian is a solid surface countertop material made by DuPont. It is nonporous, stain-resistant, and easy to clean. You can cut, drill, and sand Corian just like you would any other type of countertop material.

If your Corian countertops are looking dull or scratched, you may be wondering if you can resurface them yourself. The short answer is yes! Resurfacing Corian counters is a relatively easy do-it-yourself project.

Here’s what you’ll need to get started: • A power sander with medium-grit and fine-grit sandpaper (120-grit and 220-grit will work) • A putty knife

• Acetone • Painters tape • Resurfacing kit (available at most home improvement stores)

follow the instructions that come with your resurfacing kit. In general, the process involves sanding down your existing counters with the power sander, cleaning them with acetone, applying the new surface layer, and then allowing it to cure overnight. resurfaced Corian counters will look good as new!


If your Corian countertops are looking a little worse for wear, you may be wondering if you can resurface them. The good news is that yes, you can! Resurfacing Corian is a great way to give your counters a fresh new look without having to replace them entirely.

The process of resurfacing Corian is not too different from refinishing other types of countertops. First, the old surface will need to be sanded down so that the new one can adhere properly. Next, a primer will be applied before the new surface material is added.

Once everything is dry, you’ll have brand new looking counters!

Leave a Comment